this is some great info i found on the net, and thought i'd share with you guys.
http://george4wd.taskled.com/airlocker.html
this link offers part numbers for suplimentary solenoids for your arb lockers for like $15.00 each. if nothing else, they will make a great spare. ;) it also gives info on ataining the original arb switches at a fair price ;)
:wave:

great info erik.:8

Very good info indeed. It'll be helpful when and if I get my lockers hooked up!

i just bought one of these as a spare. it was 23.00 delivered.
CALL 858-748-2237.
part # 35A-AAA-DDBA-1BA:wave:

chris, you need to get out there and umm stand on pch. get a couple of these babies ;) get those lockers locking!:wave:

that is a great bit of info you have there... thanks for sharing it.:oink:

http://www.gulfcoastrovers.com/all/switch/
HERE IS ANOTHER TIDBIT I BORROWED FROM ANOTHER FORUM.
http://www.gulfcoastrovers.com/all/switch/Dsc00212.jpg
http://homepage.mac.com/rv6a/arb.html

ARB 4x4 Accessories
20 South Spokane Street
Seattle WA 98134
Tel: (206) 264 1669
Fax: (206) 264 1670

here rae some repair part numbers and prices.
kit [into pumpkin] 170 105 $6.71
5mm ferrule 170 603 $1.18
insert to inside of blue tube. 170 601 $1.18
3/16 nut to 5mm. 170 602 $1.97
nipple 170 604 $2.89
splice repair part 170 206 $5.09

i just ordered a few of these hard to find parts to keep in my jeep for trail spares. thought i'd share the info. i looked at other pneumatic supply houses, and it seems that arb has some special made parts for their aplications. good luck finding them in other places. for trail spares.. the lot was like 20 bucks for "their" parts. worth it ;) :wave:

Erik, are you using one of those pnumatic switches? How it is working if you are?

no... i am using the switch that comes with the locker.
:wave:

eric,
Does ARb use standard fittings across all lockers? I'm running Arb on both ends. Never thought about loosing a lock, may be nec to get these components.