So I'm practicing welding.
http://img.photobucket.com/albums/v90/paulhead/Pics/IMG_1792.jpg
http://img.photobucket.com/albums/v90/paulhead/Pics/IMG_1790.jpg
http://img.photobucket.com/albums/v90/paulhead/Pics/IMG_1789.jpg
http://img.photobucket.com/albums/v90/paulhead/Pics/IMG_1788.jpg

Best thing I ever did was take a $75 dollar class at the local adult school.

Best thing I ever did was take a $75 dollar class at the local adult school.

I've been looking for something like that close to home. . . no luck so far.

Best thing I ever did was take a $75 dollar class at the local adult school.
Is that a hint about the quality of my bead?:rolleyes: ;)

Is that a hint about the quality of my bead?:rolleyes: ;)
Nope. But there is nothing better than getting taught by a professional. Everybody does bugger welds when they start out.

a little slower.
a little more heat
and angle the tip into the direction you are going, and let it pool slightly.
tiny swirls or "C"s as you move.

my old man taught me.
thats my nickel
CB

PS, i been lookin for someone with a welder, i need to do some fab work, would gladly give ya some tips;)

Why not?

Paul

actually, I am getting ready to buy one, found a sweet deal at good ole harbor freight. (i know, i know, chinese junk, but as long as ya put a better power cord on it b4 the first use, its not all crap)

the one you have/use now, flux core or bottle???

I learned on the bottle that my pop has, but I'm gettin ready to get a flux core. there are schools that root for each, each has its pros and cons.

finally, when ya wanna get together?
I notice youre in long beach, funny, i just moved outta LB a few months ago. so, i'm familiar with the area.

lemme know
Chris.

I finally got weekends off, friggin' stoked. I wanna' weld some frame tie in's to my cage, I'll let you know.

a little slower.
a little more heat
and angle the tip into the direction you are going, and let it pool slightly.
tiny swirls or "C"s as you move.

my old man taught me.
thats my nickel
CB

PS, i been lookin for someone with a welder, i need to do some fab work, would gladly give ya some tips;)

More voltage or less wire speed.

Practice 45-45, as in 45 degrees tilted point at the puddle and opposite the direction you are welding. Basically hold a 45 degree angle and point at the direction you came from. Also hold 45 degrees if you are welding a fillet at the base of a 90 degree joint.

No need to let it puddle, if your wire speed, travel rate and voltage are correct, the puddle will travel with you.

Sound is a good indicator. If you stay in the puddle too long, it sound like water dropped in hot grease. Speed up until you get a smooth crackle.

Do not do any swirls, letters of the alphabet, or any other tip gymnastics until you can run a smooth bead.

Finally, a 30 minute lesson at my house will set you down the path much faster than burning wire by yourself.


here is a pic- no swirls, no C's, no U's, just a straight 45-45 pull weld

http://www.justaddrocks.com/images/images_lg/DSC0259.JPG

Finally, a 30 minute lesson at my house will set you down the path much faster than burning wire by yourself.


I think I may be just about ready for that lesson. :D

Best thing I ever did was take a $75 dollar class at the local adult school.
Then the worst thing I did after taking that class was not follow through with it. Wish I would have. Now I just find people I know or pay for it.

Thanx for the advice mrblaine, very straight forward. Might take you up on that 30min lesson.

More voltage or less wire speed.

Practice 45-45, as in 45 degrees tilted point at the puddle and opposite the direction you are welding. Basically hold a 45 degree angle and point at the direction you came from. Also hold 45 degrees if you are welding a fillet at the base of a 90 degree joint.

No need to let it puddle, if your wire speed, travel rate and voltage are correct, the puddle will travel with you.

Sound is a good indicator. If you stay in the puddle too long, it sound like water dropped in hot grease. Speed up until you get a smooth crackle.

Do not do any swirls, letters of the alphabet, or any other tip gymnastics until you can run a smooth bead.

Finally, a 30 minute lesson at my house will set you down the path much faster than burning wire by yourself.


here is a pic- no swirls, no C's, no U's, just a straight 45-45 pull weld

http://www.justaddrocks.com/images/images_lg/DSC0259.JPG

Whats your opinion on on board welders such as Premier? Dont weld for profession but even though this unit well get me out of trouble not happy with weld.

Whats your opinion on on board welders such as Premier? Dont weld for profession but even though this unit well get me out of trouble not happy with weld.


Personally, I wouldn't own or install any underhood welder that requires the use of electrodes, even if you gave me one.

Most folks are barely proficient in the garage with a MIG welder. Then you need to use one on the trail where conditions are never ideal. It's windy, out of position, metal is dirty, oily and generally a giant PITA. Conditions that make stick welding something only a well qualified stick weldor could pull off on a consistent basis.

That makes a Ready Welder with flux core wire a perfect choice for a trail welder. Economical, easy to use, fast, effective and forgiving. That would be and is my choice.

Paul

actually, I am getting ready to buy one, found a sweet deal at good ole harbor freight. (i know, i know, chinese junk, but as long as ya put a better power cord on it b4 the first use, its not all crap)


Chris.


True, it's not all crap, it's got a good power cord, eh?

Personally, I wouldn't own or install any underhood welder that requires the use of electrodes, even if you gave me one.

Most folks are barely proficient in the garage with a MIG welder. Then you need to use one on the trail where conditions are never ideal. It's windy, out of position, metal is dirty, oily and generally a giant PITA. Conditions that make stick welding something only a well qualified stick weldor could pull off on a consistent basis.

That makes a Ready Welder with flux core wire a perfect choice for a trail welder. Economical, easy to use, fast, effective and forgiving. That would be and is my choice.

Looks like it will work also with the Premier. That will be my next investment.

Thanks

Thanx for the advice mrblaine, very straight forward. Might take you up on that 30min lesson.
I already have & it was time well spent at Blaines! Plus - his welder is MUCH better than my little Hobart 135. :)

I'm no pro by any stretch. My welding skills have greatly diminished over time and I'm slowly trying to get back into the swing of things.

Personally, I wouldn't own or install any underhood welder that requires the use of electrodes, even if you gave me one.

Most folks are barely proficient in the garage with a MIG welder. Then you need to use one on the trail where conditions are never ideal. It's windy, out of position, metal is dirty, oily and generally a giant PITA. Conditions that make stick welding something only a well qualified stick weldor could pull off on a consistent basis.

That makes a Ready Welder with flux core wire a perfect choice for a trail welder. Economical, easy to use, fast, effective and forgiving. That would be and is my choice.
mine too... if anyone is in the market for one of these ready welders.. shoot me a pm. i can get them at a great discount.
:wave:

I drive a tow truck and on our wheel lift systems we have to have little metal skid plates to keep the boom from dragging on the ground. So I tryed out my weld pak 100 to weld some skids on there, came out good I think.
http://img.photobucket.com/albums/v90/paulhead/Pics/stinger.jpg
http://img.photobucket.com/albums/v90/paulhead/Pics/IMG_0029.jpg
http://img.photobucket.com/albums/v90/paulhead/Pics/IMG_0030.jpg