OllllllO
01-04-06, 02:50 AM
TeraFlex 5 1/2 to 6" TJ (97-06) Kit 4 Sale with superflex upper front & rear arm option, extra spacers, Johnny Joint adjustable front track bar & FLAT double trussed Pre '99 belly pan skid.
Kit parts:
S4T 4" SuperFlex lift kit includes the following parts
- 4 lower flex arms (front & rear)
- 4 heavy duty springs for 6 cyl. hard top high load (front & rear)
- 1 rear sway bar extension kit
- 1 rear track bar bracket kit
- 1 4" drop pitman arm
- 4 bump stops (front & rear)
- Instruction installation manual & all needed hardware (nuts & bolts)
Extras:
BB1T 1 1/2-2" Coil Spring spacer kit includes the following parts
- 4 spring spacers (front & rear)
FAFU Front upper flex arms for TJ, XJ, ZJ or WJ
- 2 front upper flex arms (left & right)
FARU Rear upper flex arms for TJ's
- 2 rear upper flex arms (left & right)
TJ/XJ Johnny Joint adjustable front track bar
"Flat" Early style TJ welded truss belly pan for auto/manual trans
- Flat welded truss, 2 piece welded construction stronger than '99+
Completely replaced all new arm bushings & sway bar link bushings
+ second set of new never used spare bushings included.
Kit has been used for 2 1/2 years & when removed it was completely rebuilt to factory original specifications with the new bushings & link ends. There are a few scrapes on a couple of lower control arms but they are not bent & operate freely. Kit was kept well greased & recently removed due to larger lift & axle upgrade. This kit will clear 35" tires on 15x8's with no problems (15x10's with 1" body lift). Only things required to add are your own shocks & sway bar quick disconnects.
$900 obo gets everything (current new almost $2000).
Send me a message PM or email me: animated_hourglass @ yahoo dot com
Rick OllllllO
Kit parts:
S4T 4" SuperFlex lift kit includes the following parts
- 4 lower flex arms (front & rear)
- 4 heavy duty springs for 6 cyl. hard top high load (front & rear)
- 1 rear sway bar extension kit
- 1 rear track bar bracket kit
- 1 4" drop pitman arm
- 4 bump stops (front & rear)
- Instruction installation manual & all needed hardware (nuts & bolts)
Extras:
BB1T 1 1/2-2" Coil Spring spacer kit includes the following parts
- 4 spring spacers (front & rear)
FAFU Front upper flex arms for TJ, XJ, ZJ or WJ
- 2 front upper flex arms (left & right)
FARU Rear upper flex arms for TJ's
- 2 rear upper flex arms (left & right)
TJ/XJ Johnny Joint adjustable front track bar
"Flat" Early style TJ welded truss belly pan for auto/manual trans
- Flat welded truss, 2 piece welded construction stronger than '99+
Completely replaced all new arm bushings & sway bar link bushings
+ second set of new never used spare bushings included.
Kit has been used for 2 1/2 years & when removed it was completely rebuilt to factory original specifications with the new bushings & link ends. There are a few scrapes on a couple of lower control arms but they are not bent & operate freely. Kit was kept well greased & recently removed due to larger lift & axle upgrade. This kit will clear 35" tires on 15x8's with no problems (15x10's with 1" body lift). Only things required to add are your own shocks & sway bar quick disconnects.
$900 obo gets everything (current new almost $2000).
Send me a message PM or email me: animated_hourglass @ yahoo dot com
Rick OllllllO