You heard it here first, Rock-It Man Fabrication has taken back production of the Ultimate Rocker Guards. To celebrate we are starting up a group buy at a ridiculously low price. Here are the details:

We need at least 25 rocker orders to extend the low pricing. This group buy will run through December and end Jan. 8, 2007. At that time money will be collected. Production time is 2-3 weeks. Rocker guards will be set up as follows:

Rock-It Man TJ Ultimate Rocker Guards
Countersunk 5/16th Stainless Steel bolts
1-1/2", 0.120 wall tube rock rail
Powdercoated Interior Backing Plate
Black Powdercoating

All of the above is included in the price below, there are no extras to buy.

Price: $365
Shipping: $70

Retail price is $425 plus shipping

And just incase you forgot, these are WHEELWELL TO WHEELWELL rocker guards (not flare to flare). :D

This group buy is only for the 97-06 TJ's SWB and in the above configuration ONLY. Unlimiteds are still in the works and should be released shortly.

Please check out www.rock-itman.com for more information. Also, please feel free to PM, post or call us if you have any questions.

http://www.rock-itman.com/gallery/albums/rockers/DSC02261.jpg

http://www.rock-itman.com/gallery/albums/rockers/DSC02266.jpg

Thank You!
Chris @ Rock-It Man

Yay!! Rock-It Man is back!! Congrats!

I'd take some, but I already have em!! THEY ROCK!

These rockers are Sa-WEET! The FIRST company to come out with wheel well to wheel well coverage, door to frame. Countersunk hardware and internal supports included.

These things ROCK!

Yay!! Rock-It Man is back!! Congrats!

Wow! Big news!! I 2nd the congrats!!!

I'll talk to the CFO (fiance) and see if I can make this happen... Gotta hope for a Christmas bonus! Would it be possible to save shipping if I just hop over to temecula to pick them up? That would greatly increase my chances of a purchase.

Chris, any chance of sending a couple "seal of abuse" stickers my way. You were out when I got my guards.

Chris, any chance of sending a couple "seal of abuse" stickers my way. You were out when I got my guards.


Absolutly. I need to get another batch made up so I can send them out with the new rockers. Give me a few weeks and I'll get some out to you.

Thanks
-Chris

Thanks, I finally got to finish my install by completing step seven today. They had a offroad race up in lancaster today. It wasnt a big event but they had a very small rock garden. Four of us played on it a little. There was one large boulder on one side that took out rockers and a door on the other vehicles but my rockers worked great. Just scratched up a little. The only damage I did was at the end I hung up both axles and bent my tie rod up a little. My stupid mistake by not using a spotter.

you guys never use the cool pic... :dunno: :D :yay:

http://www.myjeeprocks.com/forums/gallery/files/8/IMG_1243.jpg

:cactus:

New price is up. Let me know if there are any questions.

In case anybody is interested, I will likely be traveling down to pick up my rockers (in person) coming from Northern California-stockton / modesto area instead of paying the $70 S/H.

Anybody interested in chipping in for gas and I'll p/u their's too.
I could then meet you along either 99 or I5 (whichever route is the most convienent for everybody) and give them to you.

Let me know.

Greg

Count me in. Time for an upgrade

In case anybody is interested, I will likely be traveling down to pick up my rockers (in person) coming from Northern California-stockton / modesto area instead of paying the $70 S/H.

Anybody interested in chipping in for gas and I'll p/u their's too.
I could then meet you along either 99 or I5 (whichever route is the most convienent for everybody) and give them to you.

Let me know.

Greg

Have you ran this by Chris? He said I couldn't avoid the shipping (I'm less than an hour away from Temecula) because they're being made out of state and shipped. I would have jumped on this for sure if it was just $365.

Have you ran this by Chris? He said I couldn't avoid the shipping (I'm less than an hour away from Temecula) because they're being made out of state and shipped. I would have jumped on this for sure if it was just $365.

If I cannot reach the minimum number of 25, I will still make the rocker guards but at a local facility. If this is the case, local pickup will not be an issue.

Thanks
-Chris

I'm in for a set, but I'd strongly prefer local pickup. :(

I'm in for a set if I can avoid shipping.

L1

If I cannot reach the minimum number of 25, I will still make the rocker guards but at a local facility. If this is the case, local pickup will not be an issue.

Thanks
-Chris

If they're local (i.e. no shipping), count me in.

Seeing as there is a high local demand, I will be making these locally. Local pickup is NOT an issue.

Thanks
-Chris

Seeing as there is a high local demand, I will be making these locally. Local pickup is NOT an issue.

Thanks
-Chris

Very appreciated! I'll throw in pizza and beer if you want to hang out some time (after my wedding) and I'll even let you weld on my jeep medic control arm skids ;).

Thanks again Chris!

Update? ;)

Update? ;)

I was actually going to PM or call Chris tomorrow some time to find out... hopefully he'll check here and let us know before tomorrow afternoon! I was hoping to have them before Calico, although depending on schedule and everything, it doesn't seem as though I'll be doing much (if any, really) wheeling while out there.